SAB valves are designed for minimum noise and in a cartridge insert format for ease of maintenance and product update/change without the removal of the housing from the on-board system. Our housings can be supplied with end connections to suit the end-user requirement. The standard material used for our valves is Nickel Aluminium Bronze, other materials such as Stainless Steel, Super Duplex Steel, Monel are available on request.
Shut-off valves
SAB offers Shut-Off Valves in different designs. Our fully pressure equalized valves meet the highest ergonomic requirements. Our Shut-Off Valves can be equipped with different actuators and accessories.
Non Return Valves
These are used to avoid any fluid back flow. SAB’s non return valves are 100% tight in sealing. They can be supplied in an angle pattern, inline design or as cartridge Screw Down Non Return valves and Open/ Non-Return/ Close valves for highest demands on tightness and safety.
High pressure filter
SAB filters protect all downstream equipment against all kind of solid contamination down to filter fineness of 10 micron. The casing can be equipped with a drainage screw/ venting screw. SAB produces a standard range of single cartridge filters but have developed a bi-directional model which filters the flow in two directions.
Hull valves
All SAB hull valves utilise the cartridge valve design, they can be operated manually or with electrical or hydraulic actuators. They work on the “Kingston” principle to include a non-return function in case of breakage of the valves internals. The unique design of the SAB double hull valves gives a failsafe solution integrating two shut off valves in one housing. All SAB hull valves can be equipped with Stop, Non-Return, Screw down Non-Return or Open-Close-Non-Return valve inserts, electronic stroke indicators, locking devices and control-switches for remote or local operation and can be actuated manually, electrically and hydraulically.
| Normal width | DN6 to DN65 |
| Operating pressure | Up to PN 300 bar |
| Operating temperature | -30 up to +80°C |
| Operating medium | Gases and liquids |
| Installation position | Any |
| Connections | Threaded connections or flanged DIN |
| Body | 2.0967 |
| Head piece | 2.0958 |
| Spindle | 2.0967 |
| Tapered spindle | 2.0958 |
| Spring plate | 2.0958 |
| Spring | C-1.12000 coated |
| Seals | NBR/ PA6.6 |
| Hand wheel | 2.0975 |
Safety relief valves
SAB safety valves are type tested and CE certified to PED2014/68/EU. They are built as proportional or fast acting valves. The SAB supply is full factory inspected and preset to the system requirement, with 3rd party inspection if customer requests. SAB works together with all certified bodies and 3rd parties who include the TUV, GL, and LR to ensure they fulfill the customer’s requirements.
| Nominal width | DN6 to DN50 |
| Triggering pressure | 2-400 bar |
| Rated Pressure | PN 400 |
| Operating temperature | -30 to +80°C |
| Installation position | vertical |
| Connections | Threaded and flange connections |
| Operating medium | Neutral gases and fluids |
| Body/ Cover | 2.0967 |
| Cone | 2.0958 |
| Spindle | 2.0540 |
| Seals | C1.1200 coated |
| Dichtungen | NBR /PA6.6 |
Pedal valves
These are floor-mounted and actuated by foot, they meter the flow according to the pedal position. Our pedal valves are robust and highly reliable in rough use.
Do you have any further questions?
Our team is always available to answer your questions quickly and easily.
Vanessa Tietje
+49 421-55909-33
tietje@sab-bremen.de
Christian Viertel
+49 421-55909-0
viertel@sab-bremen.de
Daniel Nagel
+49 421-55909-24
nagel@sab-bremen.de
